Subaru Compatible FB25 Adaptor Plate Set to use on a 2014-2018 FB engine on older 2010-2013 Oil Burner Engines
 
OG Plates Made in the USA

Hardware may vary from what is in the picture.  We've gone to flanged bolts.
 
Included in this kit:
 
Adaptor Plates (2)
O-Rings (4)
Flanged Bolts (6)
 
**Sensors and Cam Sensor Reluctor Plates are NOT included**

Don't hesitate to contact us with any questions at 262-347-3939 or info@creativecnc.net

The Kit is comprised of adapter plates to mesh the two different port styles, plus hardware and o-rings (EGR pipe has to be lengthened to accommodate higher intake plenum). That is NOT included.

If you don't want to or aren't able to lengthen it yourself, contact us and we can lengthen yours for a small fee if you purchase the adapter plates from us or send an advanced replacement while supplies last. Please see https://www.creativecnc.net/product-page/extend-your-existing-egr-pipe-if-subaru-fb25-engine-conversion-kit-is-purchased
 
If needed, an Idler wheel bracket is available separately when not using the old timing chain cover. See https://www.creativecnc.net/product-page/idler-bracket-wheel-not-included-subaru-fb25
 
The conversion requires all sensors, coolant crossover tube and cam sensor reluctor plates (2) from the old engine be used on the new engine. Cut the fuel rail cover tabs off since the slots will be a little higher.
 
Check out https://www.youtube.com/@streetsmartmods if you're working on your own oil burner